Divergent pathways of β,γ-unsaturated α-diazocarbonyl compounds catalyzed by dirhodium and Lewis acids catalysts separately or in combination

β,γ-Unsaturated a-diazocarbonyl compounds possess two reactive sites for electrophilic addition-one at the diazo carbon and the other at the vinylogous γ-position.Controlled by catalyst,divergent transformations are achieved starting from the same starting materials,either by Lewis acid-catalyzed addition or by dirhodium-catalyzed metal carbene reactions.In select cases two catalysts working in combination or in sequence provide a relay for cascade transformations.In this review,we summarize advances in catalyst-dependent divergent transformations of β,γ-unsaturated α-diazocarbonyl compounds and highlight the potential of this exciting research area and the many challenges that remain.     

Synthesis and Catalytic Study of Ruthenium Carbene Catalyst Containing a Zn‐Porphyrin Ligand

A ruthenium carbene complex containing a Zn‐porphyrin ligand has been developed. The complex was characterized by ¹H NMR, IR, HRMS and elemental analysis. The catalytic activity of the ruthenium carbene complex for olefin metathesis reactions was also investigated. The complex exhibited excellent performance for both ring‐closing and cross metathesis reactions at 35°C.     

植物还原法制备负载型金纳米催化剂催化乙醇选择氧化反应

采用侧柏叶提取液还原氯金酸制备负载型金纳米催化剂,通过乙醇选择氧化反应,筛选出催化性能较好的TiO2载体。以TiO2载体为载体,考察了Au负载量、焙烧温度、催化剂用量、碳酸氢钠添加量及催化剂反应条件(时间、温度、压力)等因素对乙醇选择氧化反应的影响。结果表明,1.5%Au/TiO2催化剂(Au负载量为1.5%,质量分率,下同)催化乙醇选择氧化反应性能最佳,产物为乙醛、乙酸乙酯和缩醛,0.5%碳酸氢钠添加剂可抑制缩醛的生成,并可显著提高乙醇转化率和乙酸乙酯选择性。通过优化催化反应条件(1.5%Au/TiO2催化剂焙烧温度为400℃、用量为0.4 g、反应温度为100℃、氧气压力为3 MPa、反应时间为3 h时),乙醇转化率为47.9%,乙酸乙酯选择性为89.1%。     

钙钛矿型混合离子电子导体在能源转化中应用的研究进展

钙钛矿型离子电子导体具有良好的传导氧离子和电子性能,使其在能源转化过程中具有较好的应用前景,已成为人们研究的热点。本文综述了钙钛矿型离子电子导体的主要制备方法,并着重介绍了其在化学循环燃烧、氧气的分离、制氢、太阳能电池方面的应用。钙钛矿型混合离子电子导体可作为一种复合催化剂,应用于甲烷选择性氧化工艺,为钙钛矿离子电子导体应用新途径,同时为甲烷高效催化转化利用提供了理论支持。     

Trace analysis of Pt (IV) metal ions in roadside soil and water samples by Fe3O4/graphene/polypyrrole nanocomposite as a solid-phase extraction sorbent followed by atomic absorption spectrometry

A novel Fe₃O₄/graphene/polypyrrole nanocomposite has been successfully synthesised via a simple chemical method and applied as a new magnetic solid-phase extraction (MSPE) sorbent for the separation and pre-concentration of trace amounts of Pt (IV) in environmental samples followed by flame atomic absorption spectrometric (FAAS) detection. The nanocomposite has been characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Seven important parameters, affecting the extraction efficiency of Pt (IV), including pH, adsorption time, desorption solvent type and concentration, desorption time, elution volume and sample volume, were investigated. Under the optimised conditions, the calibration graph was linear in the range of 50–1500 μg L^?1 (R = 0.993). The detection limit and pre-concentration factor (PF) for Pt (IV) were found to be 16 μg L^?1 and 112.5, respectively. Under the optimised solid-phase extraction (SPE) conditions, the adsorption isotherm and the adsorption capacity of the nanocomposite for Pt (IV) were studied. Pt (IV) adsorption equilibrium data were fitted well to the Langmuir isotherm and the maximum adsorption capacity of the magnetic sorbent was calculated from the Langmuir isotherm model as 416.7 mg g^?1. The precision of the method was studied as intraday and interday variations. A relative standard deviation percentage (RSD%) value less than 3.0 indicates that the method is precise. Also, the accuracy of the method was tested by the analysis of the standard reference material (NIST SRM 2556) and by recovery measurements on spiked real samples. It was also shown that the optimised method was suitable for the analysis of trace amounts of Pt (IV) in roadside soil, tap water and wastewater samples.     

Selective oxidation of alcohols over nickel zirconium phosphate

Nickel zirconium phosphate nanoparticles were found to function as efficient catalysts for the selec-tive oxidation of a wide range of alcohols to their corresponding ketones and aldehydes using H2O2 as an oxidizing agent and without any organic solvents, phase transfer catalysts, or additives. The steric and electronic properties of various substrates had significant influence on the reaction con-ditions required to achieve acetylation. The results showed that this method can be applied for the chemoselective oxidation of benzyl alcohols in the presence of aliphatic alcohols. The catalyst used in the current study was characterized by ICP-OES, XRD, NH3-TPD, Py-FTIR, N2 adsorp-tion-desorption, SEM and TEM. These analyses revealed that the interlayer distance in the catalyst increased from 0.75 to 0.98 nm when Ni2+ was intercalated between the layers, whereas the crystal-linity of the material was reduced. The nanocatalyst could also be recovered and reused at least seven times without any discernible decrease in its catalytic activity. This new method for the oxi-dation of alcohols has several key advantages, including mild and environmentally friendly reaction conditions, short reaction time, excellent yields and a facile work-up.     

Rh（III）催化的N-甲氧基苯甲酰胺系列物选择性C-H氰基化反应

采用了最近热门的Rh(III)催化C?H键活化方法,以N-甲氧基苯甲酰胺系列物为反应底物, N-氰基-N-苯基对甲苯磺酰胺(NCTS)为氰基化试剂,高效合成了含氰基官能团产物。结果表明,该反应在碳酸银存在下,使用二氧六环作为反应溶剂,于80°C反应8h生成的邻位氰基取代的N-甲氧基苯甲酰胺的产率较高。进一步研究表明,该反应具有好的区域选择性和底物/官能团适应性。一系列机理实验研究表明,该反应可能采用了一个内部的亲电取代机制及使用了C?H键切割步骤作为关键限速步骤。考虑到该反应产物包含有价值的结构单元-N-甲氧基甲酰胺和氰基取代基,因而有望用于现代有机合成中。     

Preyssler heteropolyacid supported on silica coated NiFe2O4 nanoparticles for the catalytic synthesis of bis(dihydropyrimidinone)benzene and 3,4-dihydropyrimidin-2(1H)-ones

A novel magnetic acidic catalyst comprising Preyssler (H14[NaP5W30O110]) heteropoly acid support‐ed on silica coated nickel ferrite nanoparticles (NiFe2O4@SiO2) was prepared. The catalyst was character...     

水对Ni/MgAlO催化丙酮加氢的影响

研究了H2O对Ni/MgAlO催化剂上丙酮加氢为异丙醇的催化反应的影响。结果发现,在丙酮中添加少量H2O可提高丙酮转化率,但超过5%的H2O量则会显著降低催化剂活性。吸附量热结果表明,催化剂表面吸附少量H2O会明显降低异丙醇的吸附热,但对丙酮吸附热的影响较小,这也许是反应体系中少量的H2O能促进丙酮加氢活性的原因之一。当催化剂表面吸附较多H2O后,丙酮、异丙醇和H2的吸附热都降低了,因此反而抑制了丙酮的加氢反应。此外,红外光谱结果表明,预吸附水抑制了催化剂表面异丙醇脱氢生成丙酮,并抑制吸附的丙酮在表面生成烯醇盐或异丙叉丙酮等物种,这也许是少量水能促进丙酮加氢生成异丙醇的另一个重要原因。     

V2O5/MO-Al2O3（M = Mg，Ca，Sr，Ba）催化剂用于正丁烷催化氧化脱氢反应

采用浸渍法制备了不同V2O5担载量的V2O5/MO-Al2O3(M = Mg, Ca, Sr, Ba)催化剂,钒物种的前驱体为偏钒酸铵.对制备的催化剂进行了一系列表征,并对催化剂上正丁烷选择性氧化脱氢制取丁烯进行了反应研究.表征结果(包括比表面积、X射线衍射、傅里叶红外光谱、氢气程序升温还原和拉曼光谱)显示,不同碱土金属元素掺杂的催化剂显示不同的钒价态信息和催化性能.其中掺杂Ca, Sr, Ba的催化剂,正钒酸盐相很难被还原,因此催化剂的氧化还原循环难以建立,导致以上三种催化剂在正丁烷氧化脱氢反应中活性较低.然而, Mg掺杂的催化剂却显示出较高的催化活性和选择性.实验结果表明：在Mg掺杂的载体上担载5% V2O5的催化剂上600°C时可获得高达30.3%的正丁烷转化率和64.3%的烯烃总选择性.这与V2O5担载量为5%时,在获得高度分散的钒氧化合物物种时可使MgO晶相稳定存在密切相关.